压缩空气技术

0 - 35 bar, maximum static working pressure (non-pulsating)  最大 10 巴  Max. 16 bar  -0,99 bar - 15 bar  0 - 10 bar  60 bar  0 - 35 bar  1.5 - 8 bar  Max. 40 bar  2.5 - 10 bar (monostable) 1.0 - 10 bar (bistable Max. vacuum 10 bar (external pilot air)  Dependent on operating temperature; Max. 10 bar (at 20 °C); Max. 1 bar (at 60 °C)  Max. 16 bar (at +20 °C)  最大12巴  0.5 - 10 巴  最大 20 巴  0 - 8 bar  max. 63 bar (depending on temperature and nominal size)  2 - 10 bar  Dependent on operating temperature; Max. 10 bar (at 20 °C); Max. 1 bar (at 170 °C)  Dependent on operating temperature; Max. 10 bar (at 20 °C); Max. 2.5 bar (at 90 °C)  最大8巴  2.5 - 10 bar  Max. 25 bar  max. 250 bar brass, max. 400 bar steel/stainless steel  max. 70 bar (depending on temperature and nominal size)  0.5 - 60 bar  1 - 10 bar  2,5 - 10 bar (monostable) 1,0 - 10 bar (bistable) vacuum up to 10 bar (external pilot air)  2.5 - 10 bar; Max. vacuum 10 bar (external pilot air)  2.5 - 7 bar  See table. All values referred to a medium temperature of 50 °C (static working pressure)  -0,99 bar - 20 bar  0.5 - 12 bar  1 - 35 bar and rough vacuum  Liquidscolon 40/32 bar depending on the port size; Gascolon max. 5 bar (MOP 5)  Max. 12 bar, maximum static working pressure (non-pulsating)  Max. 15 bar  Max. vacuum 10 bar  max. 40 bar (to DN 32); max. 25 bar (from DN 40); max. 16 bar (from DN 65)  max. 64 bar  0,2 - 50 bar  10 bar  2.5 - 8 bar  DN 15 - DN 32colon max. 40 bar; DN 40 - DN 50colon max. 25 bar  Max. 28 bar  max. 14 bar  max. 16 bar for valves with cutting ring connection; max. 4 bar for valves with pipe thread  max. 160 bar (G 3/8, G 1/2); max. 100 bar (G 3/4, G 1); max. 60 bar (G 1 1/4, G 1 1/2); max. 40 bar (G 2)  max. 18 bar  max. 63 bar  min. 0,35 bar; max. 8,5 bar  0 - 16 bar  0,2 - 26 bar  0.5 - 20 bar  0.99 - 20 bar  15 bar (12 bar at G 1)  16 bar  2 - 16 bar  2 - 25 bar  2.5 - 10 bar (monostable) 1.0 - 10 bar (bistable) Max. vacuum 10 bar  4.5 bar  5 bar  DN 15 - DN 50colon max. 40 bar; DN 65 - DN 100colon max. 16 bar  Max. 16 bar; 13.5 x 9.5 mm hosecolon max. 12 bar  Max. 24 bar  Max. 25 bar (on stem)  Max. 25 bar (on thermowell)  Max. 6 bar (copper alloy), Max. 25 bar (stainless steel)  Max. 6 bar (on thermowell)  Max. 9 bar  max. 10 bar (to the temperature +20 °C); max. 7 bar (at temperature +40 °C); max. 5 bar (at temperature +60 °C)  max. 11 bar  max. 12 bar (K-07100622); max. 20 bar (K-07100623)  max. 200 bar  max. 400 bar (at 20 °C); max. 250 bar (at G 1 - 20 °C)  max. 55 bar (depending on connection size and temperature)  max. 6 bar  max. 70 bar (Depending on Temperature)  min. 0,0 bar; max. 15,0 bar  min. 2 bar; max. 6 bar  min. 4 bar; max. 16 bar 

24°内锥  A型  冲击结构  切割环接口  带橡胶衬里的黄铜密封  扁平密封  橡胶密封圈  用于A、B型以及可能也用于E型的旋入塞 

4.0 mm 5.0 mm 6.0 mm 8.0 mm 9.0 mm 10.0 mm 11.0 mm 12.0 mm 12.5 mm 14.0 mm 15.0 mm 16.0 mm 18.0 mm 18.5 mm 19.0 mm 20.0 mm 21.0 mm 22.0 mm 23.0 mm 24.0 mm 25.0 mm 26.0 mm 27.0 mm 28.0 mm 29.0 mm 30.0 mm 33.0 mm 34.0 mm 38.0 mm 42.0 mm 48.0 mm 55.0 mm 60.0 mm

0.2 bar  0.25 bar  0.27 bar  0.3 bar  0.35 bar  0.38 bar  0.4 bar  0.45 bar  0.5 bar  0.5 to 1.0 bar  0.55 bar  0.6 bar  0.65 bar  0.7 bar  0.75 bar  0.8 bar  0.83 bar  0.9 bar  1.0 bar  1.0 to 4.0 bar  1.1 bar  1.2 bar  1.25 bar  1.3 bar  1.4 bar  1.5 bar  1.6 bar  1.7 bar  1.75 bar  1.8 bar  1.9 bar  10.0 bar  10.0 to 18.0 bar  10.1 bar  10.2 bar  10.3 bar  10.4 bar  10.5 bar  10.6 bar  10.7 bar  10.8 bar  10.9 bar  11.0 bar  11.2 bar  11.3 bar  11.4 bar  11.5 bar  11.6 bar  11.7 bar  11.76 bar  11.8 bar  12.0 bar  12.1 bar  12.2 bar  12.3 bar  12.4 bar  12.5 bar  13.0 bar  13.2 bar  13.3 bar  13.5 bar  13.8 bar  14.0 bar  14.2 bar  14.3 bar  14.5 bar  14.7 bar  14.8 bar  15.0 bar  15.1 bar  15.2 bar  15.3 bar  15.4 bar  15.5 bar  15.6 bar  15.7 bar  15.8 bar  16.0 bar  16.0 to 32.0 bar  16.5 bar  16.8 bar  16.9 bar  17.0 bar  17.1 bar  17.5 bar  17.6 bar  18.0 bar  18.5 bar  18.9 bar  19.0 bar  19.1 bar  19.4 bar  19.5 bar  19.6 bar  19.7 bar  19.8 bar  2.0 bar  2.1 bar  2.2 bar  2.3 bar  2.4 bar  2.5 bar  2.6 bar  2.7 bar  2.8 bar  2.9 bar  20.0 bar  20.5 bar  20.8 bar  21.0 bar  21.5 bar  22.0 bar  22.1 bar  22.5 bar  22.7 bar  22.8 bar  23.0 bar  23.1 bar  23.2 bar  23.4 bar  23.5 bar  24.0 bar  24.5 bar  25.0 bar  25.2 bar  25.5 bar  26.0 bar  26.5 bar  26.6 bar  27.0 bar  27.2 bar  27.5 bar  27.6 bar  27.9 bar  28.0 bar  28.5 bar  28.6 bar  29.0 bar  29.4 bar  29.5 bar  3.0 bar  3.0 to 7.0 bar  3.1 bar  3.2 bar  3.3 bar  3.4 bar  3.5 bar  3.6 bar  3.7 bar  3.8 bar  3.9 bar  30.0 bar  30.0 to 60.0 bar  30.5 bar  30.8 bar  31.0 bar  31.5 bar  32.0 bar  32.5 bar  33.0 bar  33.3 bar  33.5 bar  33.7 bar  34.0 bar  34.1 bar  34.5 bar  35.0 bar  35.5 bar  36.0 bar  36.3 bar  36.4 bar  36.5 bar  36.8 bar  37.0 bar  37.5 bar  38.0 bar  38.5 bar  39.0 bar  39.5 bar  4.0 bar  4.1 bar  4.2 bar  4.3 bar  4.4 bar  4.5 bar  4.6 bar  4.7 bar  4.8 bar  4.9 bar  40.0 bar  40.5 bar  41.0 bar  41.5 bar  42.0 bar  43.0 bar  43.4 bar  43.5 bar  44.0 bar  44.8 bar  45.0 bar  46.0 bar  47.0 bar  47.5 bar  48.0 bar  5.0 bar  5.1 bar  5.2 bar  5.3 bar  5.4 bar  5.5 bar  5.6 bar  5.7 bar  5.8 bar  5.9 bar  50.0 bar  6.0 bar  6.0 to 12.0 bar  6.1 bar  6.2 bar  6.3 bar  6.4 bar  6.5 bar  6.6 bar  6.7 bar  6.8 bar  6.9 bar  7.0 bar  7.1 bar  7.2 bar  7.3 bar  7.4 bar  7.5 bar  7.6 bar  7.7 bar  7.8 bar  7.9 bar  8.0 bar  8.1 bar  8.2 bar  8.3 bar  8.4 bar  8.5 bar  8.6 bar  8.7 bar  8.8 bar  8.9 bar  9.0 bar  9.1 bar  9.2 bar  9.3 bar  9.4 bar  9.5 bar  9.6 bar  9.7 bar  9.8 bar  9.9 bar 

2.0 mm 2.7 mm 3.0 mm 3.3 mm 4.0 mm 5.0 mm 5.5 mm 6.0 mm 7.0 mm 7.5 mm 8.0 mm 9.0 mm 10.0 mm 11.0 mm 12.0 mm 12.5 mm 13.0 mm 14.0 mm 15.0 mm 16.0 mm 18.0 mm 19.0 mm 20.0 mm 22.0 mm 23.0 mm 25.0 mm 25.4 mm 30.0 mm 32.0 mm 38.0 mm 45.0 mm 50.0 mm 50.8 mm 63.5 mm 76.2 mm

60.0 °C 70.0 °C 80.0 °C 85.0 °C 90.0 °C 95.0 °C 100.0 °C 150.0 °C 200.0 °C

(-20 °C to +80 °C quickconnect-safety couplings)  +5 °C to +90 °C  -10 °C to +100 °C  -10 °C to +150 °C  -10 °C to +50 °C  -10 °C to +50 °C (40 mm bore), -10 °C to +60 °C (63 mm bore)  -10 °C to +60 °C  -10 °C to +60 °C (Ø 20 to Ø 63)  -10 °C to +70 °C (Ø 80 to Ø 125)  -10 °C to +75 °C (plug amplifier), -10 °C to +60 °C (chopper amplifier)  -10 °C to +80 °C  -10 °C to +80 °C (Ø 80 bis Ø 100)  -15 °C to +80 °C  -20 °C to +120 °C  -20 °C to +120 °C (G 3/4 to G 2)  -20 °C to +300 °C (at 20 bar)  -20 °C to +60 °C  -20 °C to +70 °C  -20 °C to +70 °C (Ø 32 to Ø 63)  -20 °C to +80 °C  -20 °C to +80 °C (G 1/4 to G 1/2)  -20°C 至 +100°C  -35 °C 至 + 85 °C  -40 °C to +200 °C (depending on the hose quality and diameter)  -40 °C to +90 °C  -5 °C to +45 °C  0 - 50 °C  0 °C to +60 °C  0 °C to +70 °C  0 °C to +80 °C  0 °C to +90 °C  5 °C to 80 °C  max. +150 °C  Max. 50 °C (G 1/8), Max. 90 °C (G 1/4, G 3/8)  Max. 60 °C  Max. 75 °C  Up to +70 °C  其他:- 20 °C 至 + 150 °C  气体:- 20 °C 至 + 60 °C  水:0 °C 至 + 120 °C  水:0 °C 至 + 130 °C  水:0 °C 至 + 150 °C  温度峰值至120°C  空气:- 20 °C 至 + 130 °C  空气:- 20 °C 至 + 150 °C 

After having suction pressure  Aluminium bracket  Aluminium flat jacket  Anodised aluminium  Ball seat valve (ball in brass seat)  Centrifugal filter  Centrifugal filter membrane pressure regulator with relieving, fog lubricator  Compressed air tank  Diaphragm pressure regulator with relieving  Diaphragm pressure regulator with relieving, centrifugal filter  Diaphragm pressure regulator with relieving, centrifugal filter, mist lubricator  Digital Flow Switch  fiber filter  MODY内螺纹接合器  MODY外螺纹接合器  MODY接合器用橡胶圈  MODY软管接合器  Operated by secondary pressure  Pneumatic actuators, in double- or single acting version  Pneumatic actuators, in double- or single acting version, with integrated end-position feedback  Pneumatic, double-piston, part-turn actuator, double-rocker principle  PNP  poppet valve, spring-loaded  Precision Digital Pressure Switch for excess pressure  Rocker mounted on pin  Spring-loaded diaphragm (NBR)  Spring-loaded diaphragm (NBR); Spring-loaded piston (10 to 70 bar versions)  Spring-loaded diaphragm (UR); Spring-loaded piston; (10 to 70 bar versions)  Spring-loaded, non-return diaphragm valve with adjustable opening pressure  stroke adjustment screw  内六角闭锁螺钉  加固套筒  反向弯管  变径连接器接套  变径连接螺旋接头  可转牙嵌式内螺纹接合器  可转牙嵌式外螺纹接合器  可转牙嵌式软管接合器  可逆变径件  外六角闭锁螺钉  夹紧环  已预装配  带塑料螺旋盖  带墙式连接板的角形连接器  带橡胶底座  带测试接口  带锁紧螺母  带黄铜密封牙嵌式接合器用支撑螺钉。  带黄铜密封牙嵌式接合器用软管环  带黄铜密封牙嵌式接合器用黄铜套筒。  快速闭锁接合器接头  快速闭锁接合器插头  快速闭锁接合器插头 DN 7, 2  接头管套  插入式连接器  插式连接器  插式连接器用闭锁塞  旋上式连接器  旋入式接套  旋入式连接器  牙嵌式内螺纹接合器  牙嵌式外螺纹接合器  牙嵌式接合器用橡胶圈  牙嵌式软管接合器  用于隔离壁固定  管接头  管插销  连接变径接套  连接螺旋接头  锁紧螺母  闭锁接合器  闭锁牙嵌式接合器用备用链  防松螺母  隔离插式连接器 

abrasion resistant  EPDM  NBR  Polyurethane (PUR)  PVDF  resistant to weather, ozone and UV  Soft-PVC, black, oil resistant  Soft-PVC, blue  丁苯橡胶SBR,光滑表面  天然合成橡胶,耐磨,耐臭氧,耐恶劣天气  聚乙烯  聚酰胺 (PA)  软PVC 

6.0  10.0  12.0  16.0  17.0  19.0  25.0  31.0  38.0  50.0  51.0  65.0  76.0  100.0 

1.0  2.0  3.0  4.0  5.0  6.0  7.0  8.0  9.0  10.0  11.0  12.0  13.0  14.0  15.0  16.0  17.0  19.0  20.0  22.0  25.0  29.0  31.0  32.0  35.0  37.0  38.0  40.0  45.0  46.0  50.0  55.0  59.0  65.0  80.0  100.0  125.0  150.0 

5.0 mm 6.0 mm 7.0 mm 8.0 mm 9.0 mm 10.0 mm 11.0 mm 12.0 mm 13.0 mm 14.0 mm 15.0 mm 16.0 mm 17.0 mm 18.0 mm 19.0 mm 20.0 mm 21.0 mm 22.0 mm 23.0 mm 24.0 mm 25.0 mm 26.0 mm 27.0 mm 28.0 mm 29.0 mm 30.0 mm 31.0 mm 32.0 mm 33.0 mm 34.0 mm 35.0 mm 36.0 mm 37.0 mm 38.0 mm 39.0 mm 40.0 mm 41.0 mm 42.0 mm 45.0 mm 46.0 mm 48.0 mm 49.0 mm 50.0 mm 54.0 mm 55.0 mm 56.0 mm 57.0 mm 58.0 mm 60.0 mm 65.0 mm 66.0 mm 67.0 mm 68.0 mm 69.0 mm 70.0 mm 71.0 mm 72.0 mm 74.0 mm 75.0 mm 80.0 mm 83.0 mm 85.0 mm 89.0 mm 90.0 mm 98.0 mm 100.0 mm 104.0 mm 125.0 mm

K形  L形  T形  U形  Y形  带翼形手柄的紧凑型  直道  角度45°  角度90° 

24°内锥  24°外锥  60°内锥  60°外锥  60°密封头  A型  冲击结构  切割环接口  外锥  带通过紧压环和挤压圆环的螺纹密封  扁平密封  旋入式接套上封闭式O形圈  无螺纹密封  橡胶密封圈  用于A、B型以及可能也用于E型的旋入塞  螺纹密封  铜圈密封 

10 - 24 V DC  10 V - 30 V DC  10.8 - 30 V DC  12 V DC  230 / 50 V  230 V / 50 Hz  230 V AC / 50 Hz  230 V AC, 50 Hz  230 V, 50 Hz  230/50 V AC, 50 Hz  24 V DC  24 V DC (for valves and pressure switch)  8 V  9 V - 36 V DC  max. 230V  max. 250 V AC 

0.0 °C -5.0 °C -10.0 °C -15.0 °C -20.0 °C -25.0 °C -30.0 °C -40.0 °C -60.0 °C

CE, UL/CSA, RoHS  DIN DVGW  DVGW-compliance acc. DIN 751-1 and DIN 30660  KTW-compliance for Hotwater up to +95 °C and pressure up to 16 bar.  Testing sign DV-5142 AU 0166 

0 - 10.0 bar  0 to 1.5 bar  0 to 16 bar  0 to 20.0 bar  2 to 25 bar  PN 10  PN 12  PN 16  PN 25  PN 35 

Air and nitrogen  Air or neutral gases (≤ 50 μm filter specified)  Air or neutral gases, filtered 50 μm lubricated or unlubricated  Air, neutral gases, filtered  Air, neutral gases, water, oil  Compressed air and all gases or liquids that are compatible with the materials  compressed air containing oil mist (RMA Class A)  Compressed air, neutral gases  Compressed air, non-corrosive gases  Compressed air, non-corrosive gases, non-flammable gases  Condensate (emulsion)  Drinking water  Drinking water, nitrogen, compressed air, non-aggressive liquids  dry, oil-free air and non-aggressive gases  Filtered (50 μm), unlubricated or lubricated compressed air. If lubrication is used, it must be continuous.  Filtered, unlubricated compressed air  Filtered, unlubricated or lubricated compressed air. If lubrication is used, it must be continuous.  Fine-filtered (5 μm), unlubricated compressed air, neutral gases  Micro-filtered, unoiled compressed air (0.01 μm)  Non-aggressive gases. dry, oil-free air  Only for clean compressed air  Vacuum  Water / steam, salt water, salt water, ester, ketone, alkali, caustic soda, sodium hydroxide. Not recommended for hydrocarbons  Water and ethylene glycol aqueous solution (having viscosity max. 3 mPa · s [3 cP])  一般压缩空气和碳水化合物  冷水、热水、油  压缩空气  含油雾的压缩空气  城市煤气、液态气体、沼气  惰性气体,如N2/CO2  抗水解和抗微生物作用  水  油脂  液体媒介  燃料  矿物油  空气  耐受脂肪烃类和大多数润滑油  耐受酸,耐碱和盐类溶液  耐受酸,耐碱和盐类溶液以及不同种类溶剂  耐臭氧、耐氧化、耐老化 

Bourdon-tube pressure gauge acc. to EN 562  Bourdon-tube pressure gauge for precision measurements  Bourdon-tube pressure gauge in standard design  Bourdon-tube pressure gauge with parallel male connector and two separate measuring systems  Bourdon-tube pressure gauge, CrNi steel type  Bourdon-tube pressure gauge, CrNi steel type, all-stainless steel  Bourdon-tube pressure gauge, CrNi steel type, with solid baffle wall and blow-out (safety housing)  Bourdon-tube pressure gauge, standard design, mounting ring  Calibration, testing and service unit  Capsule-type pressure gauge  Chromium plated sheet steel  contact type 821.21  Diaphragm pressure gauge in robust design or for chemical applications  Glycerine-filled bourdon-tube pressure gauge, CrNi steel type  Glycerine-filled Bourdon-tube pressure gauge, CrNi steel type, with solid baffle wall and blow-out (safety housing)  Plunger rod with integrated vacuum guide  Pre-wired  rack and pinion  Robust Bourdon-tube pressure gauge  Robust Bourdon-tube pressure gauge with electrical contact (magnetic spring contact)  Spring plunger with high-strength steel rodl, guide sleeve and lower damping spring  Steel chrome plated or black or with triangular bezel  Type "CA" = ground cover with threaded pin - swivel design  Type "CM" = ground cover with threaded pin round - swivel design  With male connector or welded connection on the pressure tap side  with pressure gauge  with pressure gauge and silencer  with pressure gauge and silencer, angled  with pressure gauge and with high performance muffler  with pressure gauge and with high performance muffler, angled  with switching function display unit  有甘油注入的弹簧管压力计 

L  LL  S 

2.1 bar 2.3 bar 2.5 bar 3.0 bar 3.4 bar 3.5 bar 4.0 bar 4.5 bar 5.0 bar 5.5 bar 6.0 bar 6.5 bar 7.0 bar 7.5 bar 8.0 bar 8.5 bar 9.0 bar 9.5 bar 10.0 bar 10.5 bar 12.0 bar 12.5 bar 13.0 bar 14.0 bar 15.0 bar 16.0 bar 17.0 bar 19.0 bar 20.0 bar 21.0 bar 22.0 bar 23.0 bar 26.0 bar 27.0 bar 28.0 bar 31.0 bar 34.0 bar 44.0 bar 45.0 bar

4.5 bar 5.0 bar 6.0 bar 10.0 bar 14.0 bar 15.0 bar 16.0 bar 18.0 bar 20.0 bar 25.0 bar 30.0 bar 40.0 bar 50.0 bar 63.0 bar 64.0 bar 100.0 bar 150.0 bar 200.0 bar 250.0 bar

测量接口 G 1/8" -28  测量接口 M 16 x 1.5  米制外螺纹,圆柱形 

BSP内螺纹,圆柱形  Vg 8 接口螺纹  管接头  米制内螺纹,圆柱形  米制外螺纹,圆柱形  软管接口 

1/2" -14 NPT  1/2" -20 UNF  7/16"-20 UNF  G 1" -11  G 1/2" -14  G 1/4" -19  G 1/8"  G 1/8" -28  G 3/4" -14  G 3/8" -19  M 10 x 1  M 11 x 1  M 12 x 1,5  M 13 x 1  M 14 x 1  M 14 x 1.5  M 15 x 1  M 16 x 1.5  M 17 x 1  M 18 x 1.5  M 20 x 1  M 20 x 1.5  M 22 x 1.5  M 24 x 1  M 26 x 1.5  M 5 x 14  R 1/2" K  R 1/4" K  R 1/8" K  R 3/8" K  Rd 105 x 1/4"  Rd 32 x 1/8"  Rd 38 x 1/8"  Rd 46 x 1/6"  Rd 55 x 1/6"  Rd 62 x 1/6"  Rd 75 x 1/6" 

-  0  0-1  1  1 (G 1/4 + G 3/8)  1 (G 1/4)  1 (G 1/4, G 3/8)  1 (G 3/8 + G 1/2)  1-3  1-4 (G 1/4 - G 1)  1/2  1/4  10  100  2  2 (G 1/2)  2 (G 3/4 + G 1)  2 (G 3/4)  2 (G 3/8 + G 1/2)  2 (G 3/8)  2+3  20  200  3  3/8  30  300  4  4 (G 3/4 + G 1)  4 (G 3/4)  400  50  600  7  70  BG1 (G1/4 and G 3/8)  BG2 (G3/8)  BG3 (G1/2) and BG4 (G3/4 and G1)  Special-lfilter (G3/4 and G1) 

12.0 mm 15.0 mm 18.0 mm 22.0 mm 28.0 mm 32.0 mm

1/4" -18 NPT  3/8" -18 NPT  G 1" -11  G 1.1/2" -11  G 1.1/4" -11  G 1/2" -14  G 1/4" -19  G 1/8" -28  G 2" -11  G 3/4" -14  G 3/8" -19  M 12 x 1,5  M 14 x 1.5  M 16 x 1.5  M 18 x 1.5  M 22 x 1.5  M 26 x 1.5  M 5  R 1/4" K  R 3/8" K  Rd 32 x 1/8" 

BSP内螺纹,圆柱形  BSP外螺纹,圆柱形  NPT内螺纹  Sleeve Ø 7.4 mm  Vg 8 接口螺纹  切割环接口  圆形外螺纹  接头 Ø 7.2 mm  接头 Ø 7.6 mm  插头 Ø 7.2 mm  插头 Ø 7.6 mm  插式接头  测试接口  测量接口 M 16 x 1.5  牙嵌式接合器  管接头  米制外螺纹,圆柱形  软管接口 

Air, hydraulic oil, oil emulsions, water  Air, neutral gases (lubricated or unlubricated)  Air, oil emulsions, water  Air, vacuum  Compressed air, water, non-toxic and neutral gases, heating oil (EL),(S), luibricants, dieseloil, water beased coatings  Compressed air, water, non-toxic and non-corrosive gases, heating systems, agriculture  Compressed air, water, oil  Compressed air, water, oils, non-toxic gases  Gas, compressed air, water, oil, weak alkaline solutions  Handling of highly sensitive parts  Handling of highly uneven parts (e.g.tubes)  Handling of narrow parts and bars  Handling of parts which only have narrow and small places to grab them.  Handling of parts with plain to an slightly rough surface like sheets, cartons, glass, plastics  Pneumatic applications  Water, gaseous and non-corrosive media, compressed air  welding equipment  welding machines  Welding Related areas  welding robots  介质为水和空气的常规应用  低压应用  压缩机  压缩空气制动系统  实验室  实验室和食品行业  工业与建筑行业  建筑、采矿和隧道施工  气动、真空和食品应用  汽车行业  油箱和设备制造  液压气动控制管路  用于压缩机,用于严苛作业环境,如采矿、  用于建筑工地、压缩机、软管管道和气锤的压缩空气供应。  空压机  系统工程  采石、地上建筑和地下工程、造船厂、加油站等  采矿设备 

102,6 mm  104,0 mm  107,8 mm  108,0 mm  108,5 mm  109,0 mm  109,5 mm  110,0 mm  111,5 mm  111,6 mm  112,0 mm  112,5 mm  114,0 mm  114,8 mm  117,8 mm  119,0 mm  122,0 mm  122,8 mm  123,5 mm  124,0 mm  126,0 mm  127,0 mm  128,5 mm  129,5 mm  131,0 mm  132,0 mm  133,5 mm  134,0 mm  134,1 mm  136,3 mm  136,6 mm  136,8 mm  137,0 mm  137,8 mm  138,1 mm  138,7 mm  139,0 mm  140,5 mm  141,0 mm  142,0 mm  142,5 mm  142,8 mm  143,0 mm  144,0 mm  144,5 mm  144,7 mm  145,1 mm  145,9 mm  147,0 mm  147,6 mm  148,0 mm  149,5 mm  150,0 mm  150,3 mm  151,5 mm  152,0 mm  152,1 mm  152,5 mm  153,0 mm  154,0 mm  155,0 mm  156,0 mm  157,0 mm  158,0 mm  160,0 mm  161,0 mm  162,0 mm  162,3 mm  163,4 mm  163,5 mm  164,0 mm  165,0 mm  165,5 mm  166,6 mm  167,0 mm  167,8 mm  168,0 mm  168,2 mm  169,0 mm  169,5 mm  170,0 mm  171,0 mm  175,0 mm  177,0 mm  177,7 mm  178,5 mm  179,5 mm  180,0 mm  180,8 mm (185,8 mm)*  181,0 mm  181,3 mm  181,8 mm  182,6 mm  182,7 mm (187,7 mm)*  182,8 mm  183,0 mm  183,7 mm  184,0 mm  184,5 mm  185,0 mm  185,5 mm  186,5 mm  187,0 mm  188,0 mm  188,5 mm  189,5 mm  190,0 mm  191,0 mm  191,5 mm  192,0 mm  192,1 mm  193,0 mm  194,0 mm  195,0 mm  196,0 mm  196,7 mm  197,0 mm  198,2 mm  198,6 mm  200,8 mm  201,0 mm  202,0 mm  203,0 mm  204,0 mm  205,0 mm  206,0 mm  208,2 mm  21,0 - 28,0 mm  210,0 mm  210,5 mm  213,0 mm  213,5 mm  214,5 mm  216,0 mm  217,0 mm  220,0 mm  223,4 mm  224,0 mm  225,0 mm  225,5 mm  226,0 mm  227,9 mm  228,0 mm  228,5 mm  229,0 mm  230,5 mm  232,5 mm  233,0 mm  234,0 mm  236,2 mm  240,0 mm  240,5 mm  242,0 mm  243,0 mm  246,0 mm  246,3 mm  247,0 mm  248,0 mm  25,0 mm  250,0 mm  252,5 mm  254,0 mm  255,0 mm  256,0 mm  257,0 mm  260,0 mm  261,0 mm  262,0 mm  264,0 mm  266,4 mm  266,8 mm  269,0 mm  270,4 mm  270,5 mm  273,0 mm  274,0 mm  280,5 mm  281,5 mm  282,8 mm  284,0 mm  285,0 mm  29,0 mm  294,0 mm  296,5 mm  299,0 mm  299,4 mm  302,0 mm  305,8 mm  307,7 mm  313,4 mm  316,0 mm  322,9 mm  323,0 mm  324,3 mm  329,0 mm  343,0 mm  359,0 mm  36,0 mm  361,0 mm  363,0 mm  376,0 mm  379,0 mm  38,0 - 48,0 mm  381,0 mm  381,4 mm  381,8 mm  382,8 mm  385,0 mm  39,5 - 49,5 mm  392,0 mm  40,0 mm  419,0 mm  44,0 mm  452,0 mm  454,6 mm  46,5 mm  47,5 - 60,5 mm  48,0 mm  49,0 - 62,0 mm  51,0 mm  52,0 mm  54,0 mm  54,2 mm  56,0 mm  57,6 mm  60,0 mm  65,5 mm  66,0 mm  67,0 mm  68,0 mm  70,0 mm  71,6 mm  72,0 mm  72,5 mm  75,0 mm  75,4 - 90,0 mm  75,9 - 90,5 mm  76,0 mm  76,3 mm  77,5 mm  78,0 mm  80,0 mm  80,5 mm  81,0 mm  81,4 mm  85,0 mm  87,5 mm  89,0 mm  9,0 mm  92,0 mm  93,0 mm  94,0 mm  94,8 mm  97,3 mm  98,0 mm 

AS-FS  D  ISE40A  MGP  MSQ  MXS  PF2A  PF3W  RB  VBAT 

BSPT外螺纹,圆锥形  BSP内螺纹,圆柱形  BSP外螺纹,圆柱形  BSP螺母螺纹  G 1/4"  NPT外螺纹  UN/UNF内螺纹  Vg 8 接口螺纹  供电阀门  圆形外螺纹  圆形螺母螺纹  密封锥  插式接头  测量接口 M 16 x 1.5  用于锁紧螺母  管接头  米制内螺纹,圆柱形  米制圈眼  米制外螺纹,圆柱形  米制外螺纹,圆锥形  米制螺母螺纹  英寸制圈眼  软管接口 

2 x 3-pole terminals (EA 50), 1 x 3-pole terminal (EA 51)  2 x 3-pole terminals (EA 60), 1 x 3-pole terminal (EA 61)  4-pin connection for headphones and charger, 3.5 mm stereo jack for connecting sensor and cable  G 1/2 female  G 1/4 internal / external  G 1/4"  G 3/4 and G 1 incl. PTFE-sealing at outer thread, G 1 1/4 without sealing  In manifold base  NAMUR-Interface, direct: 2 x G 1/8  Port 1: Plug connection for hose outside Ø 4 mm; Port 2: G 1/8 thread; Relief port 3: M 5 thread  Push-in coupling  Push-in fitting for 4 mm pipe  Push-in fitting for pipe 4 mm  SchuKo plug  thread connector  插式接口  牙嵌式接合器  软管接口 

24°内锥  冲击结构  切割环接口  带铜圈 

0.5 - 10 bar  0.5 - 8 bar  Acc. to pilot regulator  corresponds to the set pressure of the pilot pressure regulator  Max. 20 bar (regulated: max. 16 bar)  Pa 0,5 - 8 bar (Standart)
Pa 0,1 - 1 bar
Pa 0,1 - 2 bar
Pa 0,2 - 4 bar
Pa 0,5 - 10 bar
Pa 0,5 - 16 bar 

BS 5200  DIN 2001  DIN 20030  DIN 20037  DIN 20038  DIN 3228  DIN 3238  DIN 3487  DIN 3489  DIN 3852  DIN 3863  DIN 3867  DIN 3872  DIN 74297  DIN 74297 Zn  DIN 74298  DIN 74305  DIN 74310  DIN 7604  DIN 7642  DIN 7780  DIN 80705  DIN 8537 / 20033  DIN 8537 / 20036  DIN A 74304  EN ISO 2398  G thread acc. to DIN EN ISO 228-1  G-Gewinde nach DIN EN ISO 228-1, mit O-Ring  ISO 8434-1  ISO 8434-6  M thread acc. to DIN 13-1, with O-Ring  R thread acc. to ISO 7-1  R-Gewinde nach ISO 7-1, Gewindebeschichtung 

EPDM  NBR  Polyurethane (PUR)  PVDF  SBR  Soft-PVC, black  Soft-PVC, red, oil resistant  天然合成橡胶  聚乙烯  聚酰胺 (PA)  软PVC 

(HSS) Steel  1.4571  Acetalpolymerisat (POM)  Aluminium / POM  Aluminium surface treated  Aluminium UNI 9006/1 Al Mg 0,5 Si 0,4 Fe 0,2  Aluminium, painted black  Aluminium, unpainted  Anodised aluminium / technopolymer  ASTM F 36 J (NBR with aramid fibers)  Ball: Stainless steel  Black malleable iron B350-10, design symbol A  black steel ST 37-2  Black-finished steel  Brass with a bare metal surface  carbon steel  Cast-iron  Copper alloy  Copper alloy, CrNi-Steel 1.4571  CrNi steel 1.4571  Cu  Die-cast zinc  Galvanised steel  Galvanised steel / brass  hardened nickel plated steel  hardened zinc plated steel  Hood :aus Messing, Gehäuse aus Kunststoff (PA)  iron  Malleable iron  NBR - Acrylic-nitrile, butadiene rubber  nickel plated iron  Nickel-plated brass (banjo bolt), brass (ring nipple)  Nickel-plated steel  Nickel-plated steel, brass  Ohasil  Perfluoroalkoxy alkane (PFA)  Plastic (ABS)  Plastic (POM)  Plastic Grivory (PA 61/XT)  Plastic, Nickel plated brass  Polyamid PA 12, hard (according to DIN 73378)  Polypropylene (PP)  Polyurethane (PUR)  Polyurethane foam  PTFE(聚四氟乙烯)  PTFE材料球形密封  PVC with integrated special fabric  sealing: FKM (FPM)  sealing: PTFE  sealing: Teflon/NBR  Sleeve: Galvanised steel  Spring: Stainless steel  stainless steel 1.4305  Stainless steel 1.4401/1.4408  stainless steel 1.4404 (AISI 316L)  Stainless steel 1.4408  steel (FeP04), plastic coated  Steel 1.0039, 1.0345  Steel housing powder coated, perforated sheet galvanized steel, polyester felt discs  Steel or Stainless steel  Steel, rubber  Surface coated aluminium  Technopolymer  Threaded piece: Galvanised steel  to 10 bar: plastic Grivory (PA 61/XT) bzw.; to 16 bar: Alu black eloxed  Valve: Die cast zinc (Zamak)  Zinc plated steel ST 37-2  丁腈橡胶  不锈钢  不锈钢 1.4401  不锈钢 1.4404  不锈钢 1.4571  乙缩醛共聚物材料  乙缩醛共聚物材料本体;丁腈制O形圈  冲压黄铜  塑料  壳体:镀锌钢  密封:NBR  弹性塑料O形圈制双重密封  弹簧、涨圈、不锈钢销  橡胶  硅胶  硫化纤维  聚酰胺 (PA)  连接件、解锁套筒、阀门体和黄铜阀门  钢  钢 / 复合材料  钢制和带黄色塑料保护的手柄  铜  铝  铝制手柄  铝壳体  铸铁  锌  韧性铸铁制接合器头 / 钢制套管  黄铜  黄铜制壳体  黄铜制球,硬镀铬  黄铜制锥阀  黄铜镀镍 

textile  textile braided or spiral  一层纤维编织增强层  一层高强度合成细纤维编织  合成纤维编织  没有  聚酯编织  防撕裂合成纤维编织增强层