HK DFR 10 C 07

Flow divider 50:50 cartr. NG10 40-60L

The product image may differ

Qin min.

40 l/min

Qin max.

60 l/min

下载 PDF

请选择一个规格

显示产品表格

HK DFR 10 C 01 HK DFR 10 C 02 HK DFR 10 C 03 HK DFR 10 C 04 HK DFR 10 C 05 HK DFR 10 C 06 HK DFR 10 C 07

产品详情关闭

HK DFR 10 C 07

Qin min.

40 l/min

Qin max.

60 l/min

属性

Connector

SAE 10/4 7/8″-14 UNF

Design

Flow divider and combiner 50 : 50
pressure-compensated
without phase compensation

Flow rate

60 l/min

Max. working pressure

350 bar

Customs tariff number

84812010

所有属性

产品说明

提示

Tightening torque: 35 - 40 Nm.
SAE screw-in bores of Cartridge valves from different manufacturers may differ slightly, e.g., in the depth and diameter of the valve seat, even if the screw-in thread is the same. For this reason, it is essential that all relevant dimensions are compared with the technical data of the screw-in bore must be compared.

说明

These valves allow the incoming flow to be split into two equal parts (50/50) and combined in the opposite direction regardless of pressure changes and flow.
These valves are used when two identical actuators, not mechanically coupled, are to be supplied by the same pump and controlled by a single valve.