HK 230VAC L EMDV 60191

Solenoid coil 20250 f. HKEMDV1012 230VAC

The product image may differ

Nominal voltage +/- 10 %

230 V AC

Corresponding connectors

HK SP 664, HK SP 664 A, HK SP 666, HK SP 666 A, HK SP 667 220

Power input

36 W

Download PDF

Please choose a variant

Show table of articles

HK 12VDC L EMDV 60191 HK 12VDC S EMDV 60186 HK 230VAC L EMDV 60191 HK 24VDC L EMDV 60191

Product details for

HK 230VAC L EMDV 60191

Nominal voltage +/- 10 %

230 V AC

Corresponding connectors

HK SP 664, HK SP 664 A, HK SP 666, HK SP 666 A, HK SP 667 220

Power input

36 W

For valve type

HK EMDV 10 N01 HK EMDV 10 NC1 HK EMDV 12

Characteristics

Customs tariff number

85059029

Product description

Notes

In case of AC coils the power input is significantly higher in the considerably phase than in the holding phase. These must therefore never be operated without a magnet core since there is a danger of overheating and the coil can burn through. A similar effect occurs if valves with AC magnets are operated with extremely high pulse frequencies (On / Off). In such cases the coils, which are often in the vicinity of the high power input, can also overheat. For such applications the use of RC coils with rectifier plugs is recommended.
With DC coils extremely high power spikes can occur during powering down. We therefore recommend the use of plugs with protective circuits when using such coils.

Description

Code contains coil, 2 part heat sink and type plate with fastenings.
A rectifier plug must be used for the solenoid coils of type HK 230VAC S EMDV 60186.
The solenoid coils of type HK 230VAC L EMDV 60191 have a rectifier integrated in the coil.

Ordering information

Other types of coil available on request