PR 28-1 V1

Hydraulic tube 28x1 1.4301

The product image may differ

Ø d1

28 mm

1 mm

负荷情况 I：

87 bar

下载 PDF

请选择一个规格

Show table of articles

PR 04-1 V1 PR 05-1 V1 PR 06-1 V1 PR 06-1.5 V1 PR 08-1 V1 PR 08-1.5 V1 PR 10-1 V1 PR 10-1.5 V1 PR 12-1 V1 PR 12-1.5 V1 PR 12-2.5 V1 PR 12-2 V1 PR 12-3 V1 PR 14-2 V1 PR 14-2.5 V1 PR 14-3 V1 PR 15-1.5 V1 PR 16-1 V1 PR 16-2 V1 PR 18-1 V1 PR 18-1.5 V1 PR 18-2 V1 PR 20-2 V1 PR 22-1 V1 PR 22-1.5 V1 PR 22-2 V1 PR 24-2 V1 PR 25-5 V1 PR 28-1 V1 PR 28-2 V1 PR 28-3 V1 PR 28-4 V1 PR 30-2 V1 PR 30-3 V1 PR 30-4 V1 PR 30-5 V1 PR 38-4 V1 PR 40-4 V1 PR 40-5 V1 PR 42-2 V1 PR 42-3 V1 PR 50-1.5 V1 PR 50-2 V1 PR 57-2 V1 PR 64-2 V1 PR 70-2 V1

产品详情关闭

PR 28-1 V1

Ø d1

28 mm

1 mm

负荷情况 I：

87 bar

负荷情况 III：

67 bar

Ø d2

26 mm

AD公差 +/-

0.08 mm

ID公差 +/-

0.08 mm

所有属性

属性

原料

stainless steel X5CrNi18-10 (1.4301 / AISI 304)

标准

DIN EN 10216-5

结构类型

precision steel tube, seamless, (cold-drawn), metric

结构类型补充

CFA = bright annealed (annealed, metallically bright)

规格

米制的

管长度

5 to 7 metres*.

Customs tariff number

73044100

所有属性

Product description

提示

The pressure figures are based on straight tubes.
The appropriate wall thickness needs to be calculated for tubes with bends as stipulated in DIN EN 13480-4.
*Stainless steel tubes are supplied in manufactured lengths according to EN 10216-5. In terms of production, these are usually 6 meters (+/- 1m). Order quantities are rounded to the nearest possible total length, without cutting.

说明

The stainless steel pipes made of materials 1.4301 / AISI 304 (V1), 1.4541 / AISI 321 (V2) and 1.4571 / AISI 316Ti (V4) are supplied in CFA condition (bright annealed) as standard. This condition offers very good bendability and is the established standard in the hydraulics sector, particularly for the installation of pipelines.
Our stainless‑steel tubes are tested according to DIN EN 10216‑5. The dimensional tolerances (Ø, wall thickness, ovality) are restricted in accordance with DIN EN 10305‑1 ranging from 4 to 42 mm in outer diameter (Ød1). Larger dimensions are classified according to EN ISO 1127 D3/T.

附加信息

Calculation analog DIN 2413
Specific load I: static (up to 120 °C)
Specific load III: dynamic (up to 120°C)
Working stroke= P bar
Strength parameter: K 218 [N/mm²]
Safety coefficient: S 1.5
Fatigue strength: σSch/D 175 [N/mm²]
Tolerances (Ø, wall thickness, ovality) in accordance with DIN EN 10305-1
Elastic strength to DIN DIN 10216-5 Rp 1.0 to 50°C
The fatigue strength value was reduced in relation to the strength parameter by 1.4571.

订购提示

Other delivery conditions, such as CFD, are available on request and must be specified separately.