The product image may differ
Ø d1
30 mm
S
3 mm
负荷情况 I：
275 bar
Please choose a variant
Article
PR 04-1 V1
PR 05-1 V1
PR 06-1 V1
PR 06-1.5 V1
PR 08-1 V1
PR 08-1.5 V1
PR 10-1 V1
PR 10-1.5 V1
PR 12-1 V1
PR 12-1.5 V1
PR 12-2.5 V1
PR 12-2 V1
PR 12-3 V1
PR 14-2 V1
PR 14-2.5 V1
PR 14-3 V1
PR 15-1.5 V1
PR 16-1 V1
PR 16-2 V1
PR 18-1 V1
PR 18-1.5 V1
PR 18-2 V1
PR 20-2 V1
PR 22-1 V1
PR 22-1.5 V1
PR 22-2 V1
PR 24-2 V1
PR 25-5 V1
PR 28-1 V1
PR 28-2 V1
PR 28-3 V1
PR 28-4 V1
PR 30-2 V1
PR 30-3 V1
PR 30-4 V1
PR 30-5 V1
PR 38-4 V1
PR 40-4 V1
PR 40-5 V1
PR 42-2 V1
PR 42-3 V1
PR 50-1.5 V1
PR 50-2 V1
PR 57-2 V1
PR 64-2 V1
PR 70-2 V1
Product details for
PR 30-3 V1
Ø d1
30 mm
S
3 mm
负荷情况 I：
275 bar
负荷情况 III：
201 bar
Ø d2
24 mm
AD公差 +/-
0.08 mm
ID公差 +/-
0.08 mm
All characteristics
Characteristics
原料
- stainless steel X5CrNi18-10 (1.4301 / AISI 304)
标准
- DIN EN 10216-5
结构类型
- precision steel tube, seamless, (cold-drawn), metric
结构类型补充
- CFA = bright annealed (annealed, metallically bright)
规格
- 米制的
管长度
- 5 to 7 metres*.
Customs tariff number
- 73044100
All characteristics
Product description
Notes
The appropriate wall thickness needs to be calculated for tubes with bends as stipulated in DIN EN 13480-4.
*Stainless steel tubes are supplied in manufactured lengths according to EN 10216-5. In terms of production, these are usually 6 meters (+/- 1m). Order quantities are rounded to the nearest possible total length, without cutting.
Description
Our stainless‑steel tubes are tested according to DIN EN 10216‑5. The dimensional tolerances (Ø, wall thickness, ovality) are restricted in accordance with DIN EN 10305‑1 ranging from 4 to 42 mm in outer diameter (Ød1). Larger dimensions are classified according to EN ISO 1127 D3/T.
Further information
Specific load I: static (up to 120 °C)
Specific load III: dynamic (up to 120°C)
Working stroke= P bar
Strength parameter: K 218 [N/mm²]
Safety coefficient: S 1.5
Fatigue strength: σSch/D 175 [N/mm²]
Tolerances (Ø, wall thickness, ovality) in accordance with DIN EN 10305-1
Elastic strength to DIN DIN 10216-5 Rp 1.0 to 50°C
The fatigue strength value was reduced in relation to the strength parameter by 1.4571.
Ordering information
Product variants
46 Results
Search
Show dimensional drawing
Identifier
Shows 10 of 46
Column selection
Ø d1 (mm)
S (mm)
Specific load I (bar)
Specific load III (bar)
Ø d2 (mm)
AD tolerance +/- (mm)
ID tolerance +/- (mm)
